stillbeingwithyou-ferlo

#stillbeingwithyou

Ferlo joins the positive message launched by the agri-food industry under the slogan #ThisWillHappen

At Ferlo we continue to work to maintain our priority: Commitment to our customers and, consequently, to the Food Industry.

This sector has wanted to send a message of hope under the hashtag #ThisDoesn’tHavetoStop and #ThisWillHappen. Messages to which Ferlo, as involved in two of the sectors named as priorities (the food and pharmaceutical industries), wants to join. Two sectors that continue to this day, and despite the adversities, working so that the impact of COVID-19 is less.

From Ferlo we want to communicate to our clients that we act responsibly, always under extreme safety measures and the recommendations of the health system, in order to guarantee food safety in all the products that are put on the market. Likewise, as a preventive measure, we have proceeded to reduce the working day from 8:00 to 15:00. However, our clients may contact us as usual. Without further delay, emphasize that Ferlo joins #ThisDoesn’tHavetoStop in order to guarantee that #ThisWillHappen.

Furthermore, we have also created our own positive message:

We are still with you (#stillbeingwithyou).

We continue working to continue offering the best service

We continue working to continue offering the best service

Our fundamental pillar is commitment to our clients

Due to the current situation that our country is going through, and with the aim of minimizing the potential risks that could occur as a result of the coronavirus, we inform you that, both in our offices and in the workshop, we have adapted our service in 7 hours: 00-15: 00 during this week. Both will remain closed, as planned due to the local calendar, Thursday and Friday.

Likewise, we want to make you aware that Ferlo is taking the pertinent measures against the spread of the virus (COVID-19) for which, in addition, it has informed all its staff of detailed operating instructions to ensure compliance with health standards. in relation to uniforms and personal hygiene.

Regarding the loading and unloading of merchandise, Ferlo guarantees that the processes are carried out according to the protocols established by government organizations.

Finally, and always subject to a situation that is constantly changing, deliveries abroad are being made according to the established deadlines since, currently, transport is not subject to any limitations.

We appreciate, once again, your trust in us and your patience in these situations.

We hope to return to work normally as soon as possible

stillbeingwithyou

Make your Autoclave profitable with Ferlo Care

Prevention is success | Make your Autoclave profitable with Ferlo Care

In Ferlo we take care of your product

The importance of proper maintenance so that your performance is the maximum

An autoclave can be running 24 hours a day, 365 days a year, which is equivalent to 8,760 hours in a year. The company’s productive system cannot allow any of its equipment to fail. Therefore, preventive maintenance of these is essential.

The purpose of preventive maintenance is to: find and correct minor problems before they cause major failures. We must not forget that the autoclave is one of the equipment in our plant that requires more attention due to the possible risks involved in working with high pressure equipment.

Also, the autoclave is designed for sterilization of both food and pharmaceutical products. That is to say, products that go directly to human consumption, therefore, a misuse of this can cause significant risks.

The success of your product
is also our success

In Ferlo we are aware of how important your company is and that is why from FerloCare we offer our clients an individual and personalized maintenance service. The proper functioning of the autoclave offers a series of very important benefits for your product and for your production.

The peace of mind of preventing

Proper maintenance of the autoclave offers a number of very important benefits:

  • Long life of the equipment.
  • Avoid unplanned downtime due to equipment failure.
  • Avoid unnecessary maintenance and inspections.
  • Avoid mistakes in everyday operations.
  • It improves the reliability of the equipment.
  • The number of major repairs is reduced.
  • It maintains the value of the assets.
  • Improvement in safety and quality conditions for all workers.
  • Preserve the productivity of your assets.
  • Achieve return on investments

Start your path to tranquility by FerloCare

Do we chat? We wait for you in Bogotá

Ferlo arrives in Bogotá by Andina Pack de Lyon

On the occasion of the Andean Pack, the next 19, 20, 21 and 22 Ferlo travels to Bogotá.

The Andina Pack is the international exhibition of products, equipment and systems associated with the packaging, packaging, packaging and technologies of tip for the food and beverage processing industry, pharmaceutical, cosmetic and personal hygiene, agribusiness.

This year returns to Corferias the fifteenth edition of the Andina Pack fair, the only commercial, training and experience platform in the packaging and packaging technologies sector, which year after year is consolidated as the scenario ideal for investors and entrepreneurs to find the best sector. For all these reasons, Ferlo could not miss the opportunity to participate in one of the best showcases to the South American market.

With a strong presence in the Latin American market, Ferlo continues to offer its innovative attitude, from Innovation Attitude Ferlo to most of the American continent.

For four days you can find us in the Hall 23 Stand 3211. Where we will be delighted to know your proposals and offer you the best solution to your projects because, you make it possible but, together we make it successful.

Bogota newsletter

Nos vemos en lyon en

See you in Lyon

Ferlo awaits you at the Europack Euromanut CFIA in Lyon

In Ferlo we want to meet you and that you can transmit to us, first hand, your projects. Therefore, we pack again and this time we move, on the occasion of the Europack Euromanut CFIA, to Lyon.

This is its fourth edition, the Europack Euromanut CFIA in Lyon promises to be the newest. For this, this year the space for exhibitors and visitors has been expanded to reach 30,000 m2, thus offering a perfect link between the supply and demand of the agri-food industry.

Our motto is innovation and being able to listen to our customers for it,

We are waiting for you on November 19,20 and 21 in Hall 7 Stand U69.

Why is preventive maintenance in pressure equipment important? Autoclaves

Preventive maintenance refers to regular maintenance at the specified intervals.

However, why is preventive maintenance so important for our autoclaves?

The correct operation and optimum performance of our autoclaves will depend on its maintenance. Correct maintenance at the specified intervals can guarantee major and costly faults that could affect your production.
Our motto is “better be safe than sorry” and this is why we plan and schedule maintenance for your unit before a real problem occurs. Likewise, we keep records of past inspections and of all service reports. Autoclaves require special attention due to the risks associated with working with high-pressure equipment:

  • First, because they have been manufactured to work at high pressures and temperatures and improper operation or lack of maintenance could create serious risks.
  • Second, because an autoclave is designed to sterilise food and pharmaceutical products, which will be destined to direct human consumption. Any deviation to the correct use of the unit derived from its operation could cause injuries to the consumers using these products and, in a worst-case scenario, even death.
    Ferlo wishes to raise the awareness of its customers on matters related to maintenance, since their units require on-going supervision and preventive maintenance.

From Ferlo we want to make you aware that your autoclave is a team that demands permanent supervision and preventive maintenance.

IMPORTANT NOTE:

An autoclave can operate 24-hours a day and 365 days a year, which is equivalent to 8,760 hours a year. The company’s production system cannot afford to have its units fail. Therefore, preventive maintenance if ESSENTIAL.

To start your path to tranquility contact ferlocare@ferlo.com Deiscover the Ferlo  Care Assistance service, in annual maintenance program for the care of your autoclaves:

ferlocare assistance

 

WHAT DOES THE AUTOCLAVE’S MAINTENANCE INVOLVE?

The main purpose of maintaining the autoclave is to ensure that its production rate remains unaltered. To achieve this, a systematic inspection will be carried out to detect and correct possible problems, aimed at preventing faults in the units before they occur. There are two types of maintenance:

  1. Routine maintenance. This type of maintenance can be carried out by the staff working with the unit on a daily basis. It includes cleaning, lubrication, adjustments, etc.
  2. Maintenance that requires the presence of our technicians. In this case, there are different procedures. One of our technicians will inspect the machine to check for parts that need to be replaced, repairs, oil changes, program adjustments, etc. This type of maintenance will vary according to the type of operation and unit. Our technician will take the necessary records of your autoclave during each inspection to check the useful life of each part and assess the applicable replacement frequency. Ferlo carries out these procedures to ensure that technicians can anticipate to the time a part needs to be replaced and prevent problems.

 

IMPORTANT NOTE:

Any unit that is not maintained on a regular basis can
create a DANGEROUS AND UNSAFE work environment.

BENEFITS OF PREVENTIVE MAINTENANCE:

Correct maintenance of the autoclave offers a series of important benefits:– Long working life of the unit.

– Prevents unscheduled downtime caused by faults in the unit.
– Prevents unnecessary maintenance and inspections.
– Prevents errors caused in daily and regular operations.
– Improves the unit’s reliability.
– Reduces the number of important repairs.
– Maintains the value of assets.
– Improves the safety and quality levels for all workers.
– Maintains the productivity of your assets.
– Guarantees the return on your investment.

 

ferlocare assistance

    FerloCare Assistance

Road to Dubai

Ferlo will be at the Gulfood Manufacturing Fair in Dubai next October

On October 29, 30 and 31, the latest in food and beverage processing and packaging will meet in Dubai.
An event that Ferlo, as a company that always bets on innovation, could not miss.

Ferlo will participate for the sixth consecutive year in the Gulfood Manufacturing of Dubai being one of the manufacturers, coming from more than 60 countries, that during the course of three days will show the last solutions of production and packaging.

Gulfood Manufacturing in Dubai is considered the largest food and beverage processing and packaging fair in the Middle East, Asia and Africa.

Also, it should not be overlooked that the United Arab Emirates represent a gateway to the Arab and African markets, the latter, according to the MENA World Bank, could exceed one billion dollars in 2030.

You can find us in Hall 7 Stand E7-4.

We will wait for you!

FerloCare, your after sales service par excellence

FerloCare, your after sales service par excellence

In FerloCare the care and maintenance of your machines and software is our priority. Therefore, we provide our clients with complete personal attention: through the address ferlocare@ferlo.com; a Support and Maintenance service 365 days a year, composed of our experts; and a Management of original spare parts of the highest quality.

A service whose sole purpose is to guarantee the perfect functioning of our products. Because preventive maintenance reduces process times, costs and prevents downtime in continuous processes.

In FerloCare your peace of mind is our priority.

CONTACT US

 

Agrucapers keep trusting Ferlo

Agrucapers keep trusting Ferlo

The leading caper company relies on Ferlo for its new pasteurizer

Thirty years have passed since Ferlo manufactured its first pasteurizer forAgrucapers de Aquilas (Murcia). Now, the world’s leading caper production company demonstrates that it continues to rely on us as its star supplier for its new pasteurizer.

Agrucapers sigue confiando en Ferlo

With an annual turnover of more than 30 million euros and the trust of eight-star Michellín, Martín Berasategui, Agrucapers already works with its new Ferlo brand pasteurizer. A great pride for us that does nothing but ratify one of our main objectives: the quality of our equipment and the trust of our customers in the Ferlo brand.

b32f1db1-ad24-442c-b71c-1e0c44ec7df2

With extensive experience in the manufacture of pasteurizers, our specialties include pasteurization systems for bags, trays and very unstable containers such as those used for squeezes. With a body divided into zones of preheated, pasteurized precooled and cooled. Each zone works with its independent installation.

1c8739e6-e63f-415e-9ffa-bbde6bc9ad92

Agrucapers sigue confiando en Ferlo

Ferlo turns 50

On June 1, Ferlo celebrated the 50th anniversary of its creation. Half a century of history in which Ferlo has become a benchmark in its sector with presence in markets around the world.

Rafael López Serrano, as founder of the company, was commemorated at the ceremony, as well as the work of several employees before his retirement. An appointment to remember with a single goal: to fulfill another fifty years more at the head of the industrial machinery sector.

From Ferlo we want to thank all the people who over the years have trusted us. Because it is that trust that allows us to continue and grow day after day.

For another 50 years more!

50 Aniversario Ferlo from ferlo on Vimeo.